Mounting Bracket for Ethernet/SFP Media Converter in 19" or 10" Rack

This is a bracket to mount a network media converter to the rail in a network cabinet/rack. As it is just fixed on one side, it fits 19" and 10" racks equally well. There are two holes for the cable inlet on the back to allow the converter to be inserted in two orientations, thus it is possible to mount the bracket on either side of the rack.

I printed in PETG and as I was in a hurry, I used 0.3 mm layer height. In this case I did not use support material anywhere - the most critical place is the bridge over the front cutout. the bigger holes in the back for the power supply are designed to print nicely with 45° overhangs.

It snugly fits my converter which is 72 mm wide, 95 mm deep and 27 mm high.

As it is just fixed on one side, it is not very stable when inserting or removing plugs, but that should not be something you do frequently.