Logitech C270 Webcam holder and arm for Original Prusa Mini/MK3/MK4

A simple Webcam holder with a arm for a Logitech C270 Webcam. Works with Original Prusa Mini, i3 MK3, MK4 and similar printers with standard aluminum extrusion profiles. You can Mix&Match the different arms, but i suggest to use the parts and order you can find in “Printed Parts (Recommended)” and “Assembly” section.

For MK4 i also can recommend my Logitech C270 Webcam holder and arm for Prusa MK4 Z-Axis (X-End-Clip).

Print instructions

Printed Parts (Recommended)

• 1x Improved Logitech C270 Manual Focus System
• 1x Base
• Arms (There a four different types A, B, C and C. From C, you need two):
  • 1x Arm_A_50mm (or 70mm)
  • 1x Arm_B_50mm (or 70mm)
  • 1x Arm_C_50mm (or 70mm)
  • 1x Arm_C_70mm (or 50mm)
  • 1x Arm_D

Additional Parts  (if you use only the recommended parts)

• 2x T-Nut 3030 M4
• 2x M4x10 Button Head Screws
• 5x M3x16 Cap Head Screws
• 1x M3x20 Button Head Screw
• 6x M3 Nuts

Assembly

• Remove Holder from Logitech C270
• Remove Aluminum Profile
• Insert T-Nuts
• Attach Basis
• Assembly Webcam Holder
  • Arm_C
  • Arm_A
  • Arm_C
  • Arm_B
  • Arm_D
• Screw on Webcam
• Enjoy

Links
The links to Shops can be advertising links. I would be happy if you use this link, but of course you don't have to. I have linked exactly the offers from which I have also bought and was satisfied with the supplier and the goods. The products can of course be bought anywhere.

Credits
This is a improved version from knochen911