July 24, 2023
Description
This hueforgery was made from a screenshot of my favourite movie.
Can be printed with filament swaps, instructions below:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ eSUN Black Transmission Distance: 0.6
PLA+ eSun Blue Transmission Distance: 2
PLA+ eSUN Light Blue Transmission Distance: 5
PLA+ eSUN Purple Transmission Distance: 3
PLA+ eSun Pink Transmission Distance: 5
Generic Teal Transmission Distance: 3.5
PLA+ eSun Cold White Transmission Distance: 1.5
Swap Instructions:
Black until layer #9 at 0.8mm
Blue until layer #13 at 1.12mm
Light Blue until layer #14 at 1.2mm
Purple until layer #17 at 1.44mm
Pink until layer #30 at 2.48mm
Teal until layer #36 at 2.96mm
Cold White for the rest.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
3DPrintDogs
