Creality CR-6 SE and CR-6 MAX Orcaslicer and beta Bambu Studio profiles

Orca Slicer and Bambu Studio 1.7 beta Creality CR-6 Se and Max printer profiles. Supports many different layer heights and 0.2,0.3,0.4,0.5,0.6,0.8,1.0 nozzles on both machines.

If you installed the previous version please remove the files from your Orca slicer install before adding this because it may cause errors because of all the changes of the renaming of the files to better understand the layer height differences!!

V 1.6 update:

• Changed the start G-code for a better start of the print process
• Adjust Temps for filament for better print quality

This is a big update.

• Added more profiles for each nozzle There are a total of 32 profiles that is divided up between the nozzles
• Added more nozzles to both printers. now you can use 0.2,0.3,0.4,0.5,0.6,0.8,1.0 nozzles.
• Fix some errors in the code
• Change the naming for the layer height profiles and fixed the layer wide settings so you can have cleaner prints

you can get more info from the github release page on how to install 

https://github.com/bhast2/CR-6Se-Max-OrcaSlicer-profile