AICoco Under-TV Mount and Privacy Cover

I picked up an AICoco StreamCam Pro AC600 for like $60 on Amazon to replace my tired old Logi C910. When we went to put it on the TV, my wife asked “Can't you put it under the TV instead of on top? But still high enough up that it can see the kids on the floor.”

Well, I own a printer, so of course I can!

Since the TV was mounted on the wall, I knew the screw holes that originally held the foot in place would be somewhere behind it. After bending around a bit with a ruler I figured out where they were and had some dimensions to work with. My first pass was off a bit, but I revised it and came up with two versions - one that has a little wedge to catch the lip of the TV (no supports) and one that has a large lip that will for sure hold against the front of the TV, but requires supports to print.

I grabbed some old thumb screws and washers and mounted it up. Webcam is a very snug fit in to it's socket and the USB cable tucks neatly behind it.

Also, since this thing apparently doesn't know how to go to sleep, I made a little privacy cover for it. The cover is quite loose but the PTZ lens inside it - if it decides to move around - won't catch on it.

So if you happen to have a Samsung UN55ES6500F hung on your wall and an AICoco 2k webcam that you want under it for some reason - here's the solution!

The 3MF was made in Bambu Studio 1.07b and has all my settings loaded in to it. This entire set is designed and built around a 0.28mm layer height for speed. I used eSun PLA+ for the mount and some old Hatchbox True Red PLA for the cover.