Thermometer Bracket for Top of Prusa MK3/MK4 with Swivel

With the way my enclosure lights are set up, the default thermometer mount was hard to read. This is a remix of the official "Adjustable Thermometer bracket for Original Prusa Enclosure" that instead mounts to the top of the printer frame. The bracket fits both the MK3 and MK4 frames.

There are holes for 3 screws. If you want to rigidly mount square on to the printer frame, use the two outside screws. If you want to add the ability to swivel left and right, just use the center screw. NOTE: the bracket will interfere with the MK4 when it is at max Z height and swiveled. I only recommend using this feature on the MK3.

Uses M3 x 8mm screws and M3 square nuts. I've also included an alternate version that does not require square nuts (the screws just thread into the plastic).