April 3, 2023
Description
A set of saw blade holders for all common electrical jigsaws.
The lids clip on and will stay on even if you turn the holder upside down and shake hard. Your saws won't fall out even if you toss your toolbox around.
Chamfers make inserting and removing the blades easier. Filets make putting the lid on easy and give lid & body an all-around nice feeling. Small breathing holes in the bottom in case your blades get wet, but the windows take care of that as well.
The windows make seeing which blade is which easy and you can remove the saws easily.
Heights are sized for Bosch T744D and Bosch T345XF. As those are the tallest & widest blades I know of, all other blades should fit nicely. If not, let me know and I can make a wider version. Legacy version with fewer & smaller windows are available, but I didn't upload them as the 2.0 is so much better.
Original files at https://cad.onshape.com/documents/8371710b0e07c3e218f0947d/w/02ca39df6934bf7a40acb4d4/e/63a2d2bb2d613b8b9fd138c3
Canonical place for STLs: https://github.com/RichiH/3d_printing/tree/master/tools/jigsaw_blade_holder
I used PETG with 0.2 mm height and high quality settings. Comes out perfect every time.
I made another version for hacksaw blades, see: https://www.printables.com/model/441461-hacksaw-blade-holder-puk-bosch-heyco-etc
License:
Creative Commons — Attribution — Share Alike
8
RichiH
