Join the Resistance Emblem

Join the Resistance Emblem

Print Settings:

• 0.4mm nozzle
• 0.2mm layer height
• Default prusa slicer settings
• No supports
• Make sure bridging is running perpendicular to the cutouts (shorter bridging)
• Do not change the scale or else the cutouts on the back will not fit double-sided tape or stick on magnets

This emblem has multiple heights - intended for multiple manual color changes. Use the slicer to insert color changes at the different levels.

There are two cutouts on the back for ½" double-sided tape (or ½" stick on magnets).