Vacuum Hose Fitting for Makita 18V Sander

Having been frustrated with the filter supplied with my Makita 18V sander (model DBO180) constantly clogging or coming loose and falling off, I made this fitting to attach the sander directly to my vacuum.  It uses a tapered friction fit at both ends to keep the sander firmly connected to the vacuum cleaner hose.

A simple design that is very easy to print.  This was printed in PLA with three (3) perimeters to reduce the risk of cracking while under constant vibration.  No supports are needed for this print.

I would normally print this in PETG for strength, but I'm testing the properties of a variety of materials for different applications.

Dimensions (since it should fit to similar sanders as well):

Makita end - 23mm at opening that tapers down to 22mm
Vacuum end - 35mm at opening that tapers down to 33.85mm

Imperial measurements can be seen in the photos.