February 15, 2024
Description
This is a very satisfying case to print and assemble.
It's a snap-fit and requires no other fixings, and I've printed this one for use with my LowRider3 CNC by V1 Engineering.
It can be easily split for access to the electronics by pressing on the rear cable slot, which doubles as a release button.
This was designed specifically for the Big Tree Tech Full Graphic Smart Controller.
The example shown is printed in Prusament Galaxy Silver, 0.2mm QUALITY mode with a 0.4mm nozzle with bottom layer set to Hilbert Curve.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Peter H
