July 31, 2023
Description
This is designed to fit around the column of the WEN 4214T drill press (may fit other brands/models) and holds Imperial/Metric drill bits as well as sanding drums (such as the WEN DS164)
Printer: Prusa Mini - the slicer will complain of the skirt being outside the printable area, but it will print fine.
Nozzle: 0.6mm (Set to 1 perimeter in slicer, since the spacing is very tight)
Filament: I used PLA, but it doesn't matter
I have also included a picture that shows each size bit that fits into each slot. This can be printed out and taped to the side of the holder.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
WillDeed
