I created a mount for the Mini-Stealthburner fan shroud and orbiter 2.0 extruder. I intended for this to be for my heavily modded Ender 3 v2. I decided to convert my Ender 3 v2 to a Voron Switchwire Style Core XZ printer. It also features an integrated mount for the BLtouch.
Disclamer
I hope that people find this helpful, I simply created this for my own needs. I have tested this mount on my own printer and seems to be working great, but that doesn't mean that it's guaranteed to work on your setup. I am by no means a 3D modeling pro and still learning!
Hopefully someone can take inspiration from this to create an even better one!
Insights:
- No modifications needed to the original “Mini StealthBurner Orbiter mount" by @Oleynick_266380, basically plug and play
- I printed all these prints in ASA with a .12 Fine setting in BambuStudio Slicer on my P1P
- I used 100% infill just to ensure that they are solid pieces, I'm sure you could probably get away using a smaller infill.
- I used supports everywhere
- I sliced the "X bearing block in half so that the BLtouch cable can run through the center without issue. It doesn't loose any integrity for the mount.
- This mount is also compatible with the original inductive probe mentioned in the official Switchwire BOM
- Compatible with MGN12H linear rails
- You might want to mount it to the linear rail first before inserting the M3 square nuts
- I have been using the Haldis Red Lizard K1 hot end on my MS (Phateus Dragon dupe), so the BLtouch is about 1mm above the hot end, which is perfect for my setup. I've included spacers at various lengths to help if your hot end is longer. You could always take the file and stretch it along the Z axis to your preferred spacer length needed.
BOM:
- 1 M3x30 BCHS to mount the fan shroud to the mount in the center
- 2 M3x40 BCHS to bind the “Mount Left & Mount Right”
- 1 Microswitch
- 3 M3 hex nuts
- 8 M3 5mmx4mm heat set inserts
- 2 M2x10 Self-Tapping screws to mount Microswitch
- 2 M3x16 SHCS
- 4 M3x8 SHCS
- 4 M3x12 SHCS
- 2 M3x30 SHCS for mounting MS to the mount
- 2 M3x? SHCS to mount BLtouch to mount
Future Iterations:
- Sorry no wire strain relief piece for this one yet, still a WIP
Shoutout to @prasadp4009 for the integrated CR Touch mount for the Voron Stealthburner
Shoutout to @Thefahmialias_227890 for the “X Carriage” mount design for the Voron Mini-Stealthburner for the Ender 3 v2
Shoutout to @Oleynick_266380 for the “Mini StealthBurner Orbiter mount” design
Shoutout to @Dzikmen on Thingiverse for their “Voron switchwire BLtouch” design
TinkerMAN
