LogiTech g pro x Headset replacement caps

I had my logiTech headset for a few years but the plastic caps broke and i wasnt able to find any replacements, 

since the last version that i uploaded i have added two small pins to the inside cap

the pins hold the metal part that is in the head piece, the metal part has four hols on each ear ear, 

the bottom two hols are held with the screws and the two top hols are held with the plastic pins that are modeled into the printed part,

the headset has lasted for at least six months with regular use

the parts were printed with PLA on 0.2mm height.

i used the original screws that i didnt lose with some screws that came from a broken xbox controller that are the same size 

 i print the parts using PLA with tree style supports 

as far as i know some people have been successful printing using PETG

Disclaimer:
This model is an original design created from scratch using physical measurements of the broken plastic parts from my own Logitech G Pro headset.
It is not a remix or derivative of any existing 3D file.
The design was made solely for the purpose of repairing and extending the life of a personal device, in support of the Right to Repair.
Logitech is the original manufacturer of the headset. I do not claim ownership of their design, and this model is provided for personal use only, not for resale or commercial distribution.