HSW Cutter Holder

Wire Cutter Holder for the HSW

Compact holder that can be printed without support.

Easy to Snap to your Honeycomb Storage Wall.

3 Different variations.

Cutter Dimension

This holder is designed based on the generic wire cutters with the following dimensions. 

• T Thickness must be less than 13.5 mm.
• W The cutter must have a minimum of 37 mm when it is in compression.
• H Approximately 130mm height.

Print orientation:

Print flat as the image shows. No needs support.

Print Settings:

• Material: PLA/PETG
• Layer heigth: 0.2 
• Perimeters: 4
• Infill density: 25%

Happy Printin!!!