John Deere sculpture

John Deere sculpture in two sizes. 

It is possible to print the letters and paste them into the big one

No glue is needed, it is just put together. Tight connection. 

Print Settings

• 0.2 mm layer height 
• 2 perimeters
• 15% cubic infill
• 5 Top and 4 Bottom layers

Filaments

I have used the following filaments:

• extrudr PETG smaragdgrün (green)
• Das Filament PETG Maisgelb (yellow)
• Material4Print PETG Tiefschwarz (black)
• Das Filament PETG Alu-Silber (silver)