Apple TV Mount to old Panasonic TV

This Apple TV Mount is using the same mounting design as my other TV Antenna Holder:
https://www.thingiverse.com/thing:4706969
https://www.prusaprinters.org/prints/50734-tv-antenna-mount

This design is likely another 1-OFF design for my particular TV, but I'll share all the same.

The TV in the Kitchen is an old Panasonic, and there is no great place to mount the Apple TV and still get a good angle for the UV light remote. It must face forward to work, and I got tired of getting it dusty sitting on the counter next to the TV.

I've included the STEP file for remixes for possible similar TV profiles. The design itself is lightweight, super simple and only 4 pieces, no glue required. It prints <3 hours more than likely.

Assembly

2X the profile shape.

2X the lock bar.

Slide the lock bars into the groove and add the antenna. The design allows for the POWER cord and the HDMI but will not allow the OPTICAL connection (the design blocks it). On the off chance you need this connection, feel free to remis or contact me and I'll modify for you.

There are two small squares on the lock bars. They face towards the back and both should be on one side, as the lock bars are not centered to allow for connector clearance.

If you need help with the shape, let me know.