K1 Max Slider for Top Glass

This riser was originally designed by yeungmea on Thingiverse, but was a riser only. https://www.thingiverse.com/thing:6135429/files

I created and modded this in Tinkercad to not only raise the glass enclosure top, but turn it into a captive sliding door out the back, while simultaneously allowing easy access from the top.

This design came out of necessity when I had no place to store the K1 Max's fragile tempered glass enclosure top once it was removed.

I also created side clamps for the slider that bolt directly into the side panels, securing it to the printer without worry of the glass tipping back and shattering. This requires longer M3 screws than the stock ones.

Here is a link to a set of screws: https://amzn.to/3DK79Oa

You can use up to 6 clamps, but 2 in the middle have been fine for me.

My username is present on the front of the design, but I've included a “credit cover” STL in case you prefer it to not be displayed.

 

Being that this is my first mod/design in Tinkercad, besides adding logos to STL's, I'm sure it can be improved upon. That being said, I've already beefed up the clamps and included a rear seam cover as requested by another user.

I printed in Overture PETG with Creality Print's stock profile for PETG. Models are oriented correctly for printing. Use supports on the rear sections of the frame.

Please comment and post makes or remixes of my design. Enjoy and happy printing!