December 19, 2023
Description
This is a bucket. I made it because I can.
The bucket has an outer diameter of 137mm at the bottom and 168mm at the top. The height is 170mm. It can hold 2 liters (up to the handle holes) to 2.5 liters (up to the top).
The model is designed to be printed with a 0.4mm nozzle and a layer height of 0.3mm or less. Support is not needed. Use three walls, five bottom and five top layers. To make it really waterproof paint or spray the inside with clear coat.
Disclaimer:
This work by blecheimer is licensed under CC BY-NC-SA 4.0
You are not allowed to copy this model to other 3D printing websites without my permission.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
blecheimer
