Covid Vaccine Badges

With COVID-19 vaccines being distributed, encourage people to get vaccinated as soon as possible. Wear these badges to show that you've received your first or second doses. Print these out to hand out to friends, family and healthcare workers and help spread the word that it's critical for everyone to get vaccinated. Stay healthy. Spread the word!

I've included one color, two color and three color versions. The two and three color versions (labled 2C and 3C) are designed for printing on Prusa Mk3s MMU2s printers and are STLs with origins. The assumption in this design is a base color of white, with frame and letters in black for 2 color, with an option of a third color version for printing the "1" and "2" in silver and gold.

The back of the buttons have an overhanging tab with a 1mm gap underneath. The tab is to help hold in place a 20mm bar pin. To hold the bar, place a drop of epoxy on the base in front of the tab before you slide the bar under the tab. The glue slide with it and hold the bar permanently under the tab.

If you do not have a MMU2s setup, you can still print these in two colors on any modern one color printer that allows you to pause and change filament mid-print. The top layer of the white level ends at 3mm. Once you pass the final white level, watch to see the printer starting on the frame and letters, pause the printer, change filament to black resume print.

For a nicer surface finish, I suggest going into Expert Mode/Print Settings/ Infill and select Enable Ironing if you're using Prusa Slicer 2.3 or later.

Printer:
i3 MK3s MMU 2s

Resolution:
0.15

Infill:
20%

Filament brand:
Atomic and Innofil or any quality PLA filament

Filament color:
Black, white, silver and gold

Filament material:
PLA and PETG

Print instructions

I've included one color, two color and three color versions. The two and three color versions (labled 2C and 3C) are designed for printing on Prusa Mk3s MMU2s printers and are STLs with origins. The assumption in this design is a base color of white, with frame and letters in black for 2 color, with an option of a third color version for printing the "1" and "2" in silver and gold.

The back of the buttons have an overhanging tab with a 1mm gap underneath. The tab is to help hold in place a 20mm bar pin. To hold the bar, place a drop of epoxy on the base in front of the tab before you slide the bar under the tab. The glue slide with it and hold the bar permanently under the tab.

if you do not have a MMU2s setup, you can still print these in two colors on any modern one color printer that allows you to pause and change filament mid-print. The top layer of the white level ends at 3mm. Once you pass the final white level, wath to see the printer starting on the frame and letters, pause the printer, change filament to black resume print.

The Joy is from The Joy Project. https://www.thingiverse.com/thing:3298739