Schiit Remote Stand/Holder

Fairly simple remote stand that doesn't need any supports.

I currently only have one version of the stand/holder with variations for different remote combos, I may make a shorter version or a 3 remote version in the future, so feel free to bookmark and check back for additions. Feel free to also leave a comment if there's a remote combo that I haven't added yet and I may add it here.

Print Instructions:

The print shown in the photo used the following filament/settings with an SV06+: 

Black Hatchbox PETG - Nozzle: 230C Bed: 75C (max 40mm/s print speed)

30% infill 

0.2mm QUALITY

Not all printers are the same though, so use the settings that will work best for your own printer.

After 7 failed prints and design iterations I finally feel confident sharing this here lol, hope you enjoy the print!

Side Note: I use blue tac on the bottom of the stand to keep it from moving when I grab or put away one of the remotes.