Airbrush Cleaning Pot

Could not find a pot that was heavy enough and stable enough for my workspace. So Fusion to the rescue. 

Made it as easy to print as possible with no supports. 

Print Settings

4 bottom layers

3 top layers

3 perimeters

Printed with both a 0.4mm and 0.6mm hot-end successfully. 0.6mm nozzle means it is a bit of a tight fit on the thread so a little sanding or just running the threads together over and over to make them more smooth.

No supports needed. 

I have printed in both PETG and PLA with waterproof results. 

Assembly

Just a bit of CA glue between the top airbrush holder and lid. Use the filter basket to get the alignment right. 

Put a piece of sponge or microfibre cloth in the filter basket to allow air but not fumes to escape.