Modular hair claw clip V3

Here is a modular hair claw clip with 3 different claw. The system is very simply. 

Improvement: 

• With V3, you don't need support on the clamp, and you still need it on the clip.(in prusaslicer you should set the overhang threshold to 35 degrees to use less material)
• The opening problem is solved thanks to the comment. Now the clip claws are smaller and the pliers open wider
• There are two forms of clamp and clip, a straight one (V3) and a slanted one (V3 draft).

Print detail : 

• Material : PLA
• Print layer : 0.16mm
• Support : Everywhere
• Infil : 15%

Dimension: 

• Clamp V3 : 40mm/35mm/20mm
• Clamp V3 droit : 40mm/35mm/27mm
• Clip 1 : 70mm/40mm/22mm
• Clip 2 : 60mm/33m/22mm
• Clip 3 : 60mm/25mm/22mm

Please give me return to improve it and ad new claw. Thank you.