July 31, 2023
Description
This spacer goes between the Newbee 4GS motor mount plate and the motor and prevents the pinion gear from contacting the inside of the gear drive cover when using Reacher/SkyartPower/Radium motors.
I recommend setting the Z height of the part around 1.4-2mm. I think I personally used something like 1.4mm.
5 wall loops
100% infill
USE HIGH TEMP RESISTANT FILAMENT, NOT PLA. Use CF-PETG at a minimum. Preferably something that has a HTD of 100*C+
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
luc1d
