August 1, 2023
Description
This adapter lets you mount the Klickfix holder to a Ninebot G30D II scooter. It might also fit to other variants of the G30. Please leave a comment if you've tried it.
Parts needed
Drill with a 5mm drill into the 4 existing screw-holes through the backside of the adapter.
An easy way to do it is to remove one screw, then drill, put the screw back in. Remove the next screw, drill, put back in and so on.
Press the “Adapter” print into the arc-profile of the Klickfix holder, as visible on the bottom of the picture above.
Put the tape that comes with the holder onto the two indented areas of holder- and adapter-print.
Use the M5 screws and nuts to put everything together.
The idea to drill through the adapter came from this model for Soflow cooter: https://www.thingiverse.com/thing:5192238
And the odd shape of the Ninebot-profile was taken from the Fusion-file of this AirTag-hook model: https://www.printables.com/model/383237-e-scooter-bag-hook-with-airtag-compartment-fits-se
License:
Creative Commons — Attribution — Noncommercial — Share Alike
11
dfrommi
