August 3, 2023
Description
I hope to see your makes!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Original artwork by KelvinSF on Deviant art
Filaments Used: PLA
White Transmission Distance: 4
Black Transmission Distance: 0.6
Red Transmission Distance: 5
Yellow Transmission Distance: 6
White Transmission Distance: 6
Swap Instructions:
Start with Jade White
At layer #6 (0.56mm) swap to Black
At layer #7 (0.64mm) swap to Red
At layer #16 (1.36mm) swap to Yellow
At layer #19 (1.6mm) swap to White for the rest.
License:
Creative Commons — Attribution — Noncommercial
Jpbear09
