Compartment divider for Stanley assortment drawer

Design

These compartment dividers are designed to sit tight in the groove of the drawers, without bending the drawer outwards at the upper edges. They are also made to use as little material and print time as possible, while still being robust enough for the job. This is reached by giving them a relatively thin wall of 1mm but adding a 2mm frame around it.

Material

I have chosen to print the parts from clear PETG (just because it matches the drawers well, looks nice and it robust). I would strongly guess that PLA is totally fine as well. 

Printing

Just print the part in the uploaded orientation with 100% infill.

Happy printing!