Q-Tip Holder

I created this holder to store Q-Tips on the sink and included a cover to protect them from the usual splashes that happen around the bathroom sink.

You may want to attach self-adhesive rubber bumper pads to the bottom to help keep it in place and/or to allow some air circulation below when it's used in a wet location!

I printed this in generic transparent PETG at 0.2 mm layer height on my Prusa MK4, though it could be printed at 0.3 mm for a faster print.  No supports are needed.

Along with the STL file, PrusaSlicer version 2.6 files as well as Prusa MK4 g-code files are provided for both the traditional wall and fuzzy outside wall variants.

The attached photos show the fuzzy variant in generic transparent PETG printed at 0.2mm layer height with a 15% gyroid infill printed on a Prusa MK4.

Note that this is a longer version of my Dental Pick Holder - so you can make both for a matching set!

Be sure to check out my other designs - including honeycomb storage wall (HSW) accessories, universal key covers, and a diverse collection of household accessories and 3D printing tools - on Printables at https://www.printables.com/@PhilCaruso_661446/models