Hyperboloid Plate Scraper

After a print using organic support I had difficulties to remove the support's feet from the steel sheet of an MK4. Missing a spatula at the work location, I grabbed a piece on which I worked for another project and lo and behold it worked beautifully. I share it in the hope that it works also for other people.

I printed the piece on a MK3S+ using Prussament clear PETG using the following general characteristics:

• 0.6 Revo nozzle
• 0.35 mm layer
• 15% gyroid infill
• no skirt or brim
• no support