August 5, 2023
Description
Hope your make comes out pretty!
Original picture by Roman Dubina, their name is at the bottom right corner of the picture
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
Black Transmission Distance: 0.6
Red Transmission Distance: 5
Yellow Transmission Distance: 6
Jade White Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Red
At layer #11 (0.96mm) swap to Yellow
At layer #14 (1.2mm) swap to Jade White for the rest.
License:
Creative Commons — Attribution — Noncommercial
Jpbear09
