Just Another Hair Moon (now with thicker moons!)

Edit: Today I wanted a thicker moon, these first ones are quite flat, nothing matter with that and I perfectly love them still, but some days you just need more moon. So, there's those new .stl's that are, hmm, various and two of them are almost the same and I couldn't decide what to put here, so.. Your problem now! They are 9mm and 10mm thick, older ones are just 6mm, edges has been done again for the thicker ones to fit their feeling. Note that you'll propably gonna need supports with the thicker ones.

Original post:

I wanted a hair moon, I have made wooden ones before and now I wanted a printed one. I like this rounded end, narrow model I use with my wooden ones, so I drew it.

This is fast and easy, prints flat, didn't need any supports, don't look like topographic map when printed. I printed with PLA, 0.6 nozzle, 50% infill, 3 perimeters, 4 bottom, 4 top and it toke around 45 minutes. Didn't need to do anything to clean up the print, just put it into my hair right after the printing.

I included original export .3mf from Fusion360 and a .stl files.

Sorry about the blurry photo with the moon in my hair, reeeeally hard to take a pic by yourself!