September 2, 2023
Description
Parametrizable Plug for low pressure hoses for a hurry. The rear part is to use one spanner, it rounds to millimeters, To print place it on top.
For other sizes, just change the value of the parameter hoseDiameter in the spreadsheet for your needs
There is some confusion in the denomination of the different hoses, sometimes the inner diameter is used, others the outer one. Sometimes in inches an others in rounded millimeters
This table is for the models supplied.
| ID in | ID mm | OD mm | found denominations |
| 4 | 6 mm | 4x6, 6mm, 4mm | |
| 1/4 | 6.35 | ||
| 3/8 | 9.525 | ||
| 1/2 | 12.7 | 16 mm | 13x16, 16mm, 13mm |
| 5/8 | 15.875 | ||
| 3/4 | 19.05 | 25 mm | |
| 1 | 25.4 | 32 mm | 32 mm |
There is an angle parameter to avoid the use of supports, default is 30º.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
BITaMinD R+D
