60mm suction hose to DN60 tube connector adapter

For my latest dust extraction cyclone project stage I chose to use DN60 sockets because I am using 60mm suctiion hoses in my workshop and the DN75 I used in stage1 of my project was too clumsy to design with. So here is my adapter for DN60 tubing to my 60mm suction hose.

You get three designs here. One (long) is suited best for regular DN60 tubing from your local hardware shop. The short versions are specifically designed to fit my Cyclone stage 2 60mm sockets.

Print instructions

Print Settings

Printer Brand: Anycubic

Printer: All-metal Mega

Rafts: No

Supports: No

Resolution: 0.2mm

Infill: 15%

Filament: Patona PLA white 
 

Notes

Use a brim to improve bed adhesion!

I always enable adaptive layer height in Cura when printing this type of parts so that more sensitive areas of the object are printed with smaller layers and easy parts are printed with thicker layers.