Shaver wall holder (MultiClip)

This is a wall holder that should work with many commonly used multi-blade shavers.

If you want to use this thing, you need to print it along with two MultiClips of your choosing, enabling you to mount the holder to a surface in any way you prefer.
You can find the MultiClip in my public designs (with extensive explanation).

See the pictures for an impression of the mounted result. In that example I used a Glue Clip, put a glob of hot glue on it and pressed it against the wall. But there are also clips for screwing, stapling and even rail mounting available.

If you like the MultiClip idea you might want to have a look at some more MultiClip-enabled designs. You are also very welcome to use the MultiClip Templates for your own objects.

Print Settings

Printer Brand: Anycubic

Printer: i3 Mega

Rafts: No

Supports: No

Resolution: 0.15

Infill: 25%

Filament: Anycubic PLA white 
 

Notes: 

You will need cooling for the overhangs and bridging parts. If your printer is not good at bridging, add some support to the center of the clip gap.