Bathroom / Accessory Shelf 30 x 8.5 cm - MultiClip

This is a multipurpose accessory shelf for your bathroom, your office or your workshop.

If you want to use this thing, you need to print it along with two or four MultiClips of your choosing, enabling you to mount the holder to a surface in any way you prefer.
You can find the MultiClip in my public designs (with extensive explanation).

Depending on your mounting option and accessory weight, you can also optionally print two or four shelf supports. They come in a "bare" version (made just for the looks), a screwhole variant (for 3mm screws) and a glue version, made to support the use of glue multiclips with even more gluing surface. In the example pictures the shelves have been attached to the wall with 8 dabs of 175°C hot glue each and they hold very well.
But there are also clips for screwing, stapling and even rail mounting available.

If you like the MultiClip idea, you might want to have a look at some more MultiClip-enabled designs. You are also very welcome to use the MultiClip Templates for your own objects.

Print Settings

Supports: No
Resolution: 0.2
Infill: 20%
Filament: Sunlu PLA Marble

Notes: 

You can print the support pieces either as they come without supports or lying on the side, which may - depending on your printer - look better and give them more strength.
But when printing them sideways you need to enable support from the bed.