MK4 hotend-w-sock tribox

If you looking for storage up to three complete hotends of your MK4, this can help you. Box is designed to fit whole hotend/nozzle parts with silicone sock on, and straight (installation) cables with bend connector of heater and straight insert-fit of termistor connector. If you desire to improve isolation of surrounding air, you can use optional seal and insert it into dip around bottom part (not needed for storage or lid function). 

Bottom (blue on picture, double hinges) part is the one to use as tray-storage one, other one (single hinge) is ment to be closing lid - it has extended and rounded tolerances to allow rotate-swing around upper thicker hotend sock portion.

You can also loosely fit just the nozzle in slot portion of whole hotend.

For hinge use any M3 screw with 12mm length or more, if you wish to move / rotate hinge more freely try to file inside hole of lid part lightly.

Rectangular holes inside both main parts are for 5x5x2,5 magnets if you wish to improve lock-click. 

Due to size it is recomended to print two main parts separately, but they do fit on standard MK4 bed next to each other in single print both as well.