Cloth Hanging Bracket

Do you want to hanging something cool on your walls, but it is made from cloth?
Don't want to frame it inside picture frame/can't find big enough frame for it??

Then this is for you.

This bracket uses four DIN7991 (countersunk metric bolt) M3x6 screws and four M3 hexagonal nuts to clamp down onto the cloth and have a designated hole for wall screw.

It was designed for relatively thin cloths, since those are usually the type that get printed on decorative stuff.

In the picture you can see a 2 by 1.5 meter map I designed it for to hold, the closed bracket onto the fabric and how it looks like with the hardware in place and a close-up mounted on a wall.

Print orientation: print both parts with cloth-catching studs pointing upwards.
the hexagonal nuts holes should be drilled with 3mm drill bit (closed for quality of print issues, not needing to draw the round hole in the air)

My suggestion: print one to make sure it fits your type of cloth and in case it is, print the other ones.