DIY Ventilation for 3D Printer Enclosure

I set about building an extraction fan for my 3D printer enclosure as I do a lot of 3D printing and prototyping on my Voron 0.1 that sits next to me and it gets a bit stinky sometimes.

Did a YouTube video about this and these are the files for the final build.  The Window Mount 100mm part is attached to a window blank wooden panel. There's also a wall outlet mount for the 100mm ducting as I later vented out through a wall in a different room.

The Outlet Diffuser is glued with epoxy to the Fan case.

M2 x 8mm self tapping screws are used to attach the  Fan Case to the Tophat panel, and the Diffuser 100mm Conn to the Diffuser.

Tip:  Attach the Diffuser 100mm Conn to the Diffuser before gluing to the Fan Case, otherwise its more tricky to screw the M2 screws in.

I printed in PETG with 0.2mm layer height and no supports.