Squash Ball Feet Prusa MK3 Frame

My Personal take on squash ball feet for the Prusa MK3 frame

This is a remake from: Low profile v-slot squash ball feet
by dermatin January 27, 2019 https://www.thingiverse.com/thing:3385254/files

I used his design on my Bear frame and loved them.

There are tabs to trap the T-Slot nuts. I suggest turning the printer on it's side and laying the T-Slot nuts in the 3030 frame then just slide the foot over trapping them.

I used M5 10mm screws and matching T-Slot nuts.
you could probably get away with one screw per foot.
You could probably use a washer to down size the screw to M3 though I have not tried.

I only use two yellow dot squash balls because the are so dead that they really don't bonce. That's why they work so well

A fusion file is included if you want to Mod this.

Print instructions

I have included a screen shot of how to orientate the part for printing.

I use 3 perimeters in PETG