Disney Pin Board (Star from Tangled)

From the movie “Tangled” comes the crest of the Kingdom of Corona--the Sun Circle Gold Medallion.  All parts printed at 0.2mm layer height. I designed a 0.18mm gap between all parts that fit together based on the tolerances of my printer and the filament I used. The size of the head 'frame' was limited by my print bed.

Print seven copies of the "Mesh - Flames.stl" and seven copies of the “Brim - Flames.stl”.

When printing the meshes (i.e., the center and arms of the star) I used 13% gyroid infill. Feel free to try other infill patterns and densities.  Ensure that you turn off printing the top and bottom layers in order to expose the infill which serves as the 'mesh' on which to mount the pins.

When assembling the 'frames', you're going to have to use a little superglue to keep it together. The 'meshes' should insert and sit snuggly in the frames, but you can superglue as you see fit.

Here are other Disney-themed pin boards for you to check out for personal use:

• Mickey
• Stich
• Millennium Falcon
• Death Star
• Mickey Silhouette

Click here to check out all of my other uploads.  Happy printing!