Tree Portal (Filament Painting)

6 Color HueForge model. 'Tree Portal' filament painting made using Sunlu and Esun Pla+ filaments.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Sunlu PLA+ Black Transmission Distance: 0.6
PLA Esun PLA+ Pine Green Transmission Distance: 1.5
PLA Sunlu PLA+ Grass Green Transmission Distance: 2.5
PLA Sunlu PLA Green Transmission Distance: 6
PLA Sunlu PLA+ Pure Yellow Transmission Distance: 5
PLA Sunlu PLA+ White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Pine Green
At layer #7 (0.64mm) swap to Grass Green
At layer #8 (0.72mm) swap to Green
At layer #9 (0.8mm) swap to Pure Yellow
At layer #10 (0.88mm) swap to White for the rest.

This is a filament blending model, I would recommend trying to match the td as close as possible if not using the exact filaments to get the best results.

Use the exact numbers in your slicer to match up properly.

Two different size models are supplied and designed to print with 0.4 nozzle
 

**If re-scaling model make sure not to alter the Z height of the model**