Printable velcro tapes

Hey guys, after tons of updates I would like to introduce you a printable alternative for hook & loop.  

Voilà!

Easy to use - you just need to stick it on flat sides to whatever you need removable and hanging (I used a glue gun). Also, feel free to cut into smaller pieces if it is necessary. 

Test prints were printed on MK3S+ with 0.4 nozzle and 0 Z lift settings which I highly recommend to prevent stringing. 

I also tested this print in my Ender 2 pro where was necessary to change the minimum travel after retraction is at least 1mm because of a small number of retractions. 

After updating the setting retraction changes to:

SO IT IS IMPORTANT FOR other printers with Bowden extruder check this setting!