Traxxas Xmaxx GoPro Camera Mount

This is a mount made to protect your gopro by placing it inside the Traxxas Xmaxx. You do have to cut the windshield out of a body, but after that the mount is extremely adjustable. It can be moved forwards, backwards, and the camera can be moved up and down. The included files are for Version 2 which addresses some minor issues I discovered while using it. See the notes section for more information about the screws you'll need.

To see version 1 of the mount installed and in action watch the videos below:
Mount and First Test: https://youtu.be/FwdquCv055U
Bashing in Mud with Mount and protector: https://youtu.be/07Z2RzMfOb8

Print instructions

If the camera mount moves on you, consider placing a piece of rubber behind it between the printed mount and the Gopro mount and possibly using locktite

The holes in the very front of the protective tray can be used to provide extra support by running a zip tie around the outside of the tray and the roll cage under the hood.

See the Gopro mount in the included pictures to know which one it was designed for.

What you Need:
A single bolt with 20mm long threads for the gopro mount
7 - hex nuts for m3 screws
4 - m3x16 screws to secure the mount to the frame
3 - m3x12 screws to secure the protective tray to the mount

NOTE: You can get away with using 1 screw for the protective tray as long as you use a zip tie for the front.