Atari Jaguar Gamedrive snap lock case

This prints as a single piece and then folds shut with a nice snap lock mech.

Don't try to print this as separate pieces as you will never be able to put them back together again as the hinge has tight tolerances and is designed to be printed together at the same time. So your printer needs to have a bed of at least 210mm wide for the case to fit on it and be capable of printing tight tolerances. The hinge might need to be rotated back and forth a couple times after printing to loosen it up.

I have uploaded two versions: a regular version and a multicolor version. 

The regular version has a debossed logo on it where as the multicolor version is designed to have the logo printed in a different color on the case.

To print the multicolor version, in your slicer click on the case and then use the option to "Split to Objects" in BambuSlicer or PrusaSlicer. If you use Cura or something else they probably have a similar option.

After you split to objects, you can select the individual letters of text in the logo on the front of the case and assign them a color. For the version I sell I assigned black to the case colors and then red to the letters. But feel free to get creative.