This wall anchor helps you to attach your furniture to the wall to keep it in the right position. Important note: this is not intended to be a safety device.
Note: the cover photo is upside down to better show how it works.
Design features
- This is designed to be secure when attached, but easily removable without tools.
- It accepts #6 or #8 round head screws.
Printing
- Print the model as-oriented in the .stl file.
- Choose a material appropriate for your environment.
- No supports should be needed.
Installation
- Determine the height from the ground that the screws will go. Look at your furniture to identify a solid place to attach them. Mark that height on the wall.
- Insert one of the screws into a stud in the wall at the correct height.
- Place single end of the anchor over the screw, and slide the furniture into position.
- Rotate the bracket to be upside down on the wall, and mark the horizontal locations on the furniture where the screws will go.
- Insert both screws into the furniture, exactly 25 mm apart.
- Test the anchor and adjust the screw depths as needed.
- Place the furniture into position and slide the anchor over the screws.
- To remove, pull the anchor up until it slides off.
Safety notes
- This is not intended to be a safety device. It has not been tested for, or approved for, any safety applications.
- Follow all manufacturer instructions to properly secure your furniture.
Other notes
- I've designed this with OpenSCAD in a parameterized way. If you'd like any modifications (e.g., the screw dimensions, overall length/width, etc.), please send me a message and I'll see what I can do.
Adam
