SSD V-Slot Mounting Bracket

I designed this SSD bracket which allows you to easily snap in (and out) a SATA 2.5in 7mm SSD. 

If using a 4040 extrusion, it will sit flush with the bottom edge.

I originally designed this to run my printer's SBC from an SSD but it could be used for other purposes.

Required Hardware:

• 1x - 8mm M4 Flat-Head Screw
• 1x - M4 T-Nut

Print settings of importance:

• Supports: I recommend supports for the snap overhangs

Please post your makes and let me know how it works out for you! 

~~~~~~~~~~  Update Log  ~~~~~~~~~~

8/9/2023 - Initial Release