Top Mount Pneumatic Fitting Bracket

This model can be useful to makers who use a filament dehumidifier while printing and have a direct drive printer. 

Printing this model is simple and quick. All you need is: 

1. PTFE Tube 
2. PC4-M6 Pneumatic Fitting (Hotend pneumatic fitting) 
3. A printer with a 2020 Profile frame 

Print Settings: 

• Filament - Any Filament 
• Layer Height - 0.2 mm
• Perimeters - 2+ perimeters 
• Infil - 10%+ 
• Supports - No
• Brim - Optional 

Assembly Instructions: 

To assemble it the first screw from the top left bar should be removed to insert the bracket into the bar. Once inserted the screw can be screwed back in. Screw in the pneumatic fitting into the thread and insert a short PTFE tube inside.