DIY Planter - Drainage Pot - 120mm - Vase Mode

This model is probably the fastest way to print a standard 120mm drainage pot;

In vasemode, this pot is printed in about 1 hour, so you can have a new home for your plants as quickly as possible.

For stiffness in vasemode it is necessary to print with a wall/line width of at least 0.6mm (my model here) or maybe even 0.8mm - both should be possible with a 0.4mm nozzle. You can print a little hotter than normal to help with the extrusion of thicker lines. (My print: "layer height" = 0.2mm) Cura can't make holes in the bottom layers in vasemode (spiralised contour), so you'll have to make them yourself. (I did it with a soldering iron or a drill)

If you do not want to make holes yourself, I have added a non-vasemode version with holes in the bottom, but disclaimer: I have not printed this version yet.