Vase Mode Desiccant Container for the Bambu Lab AMS

What makes this AMS desiccant container better than the dozens of others out there?  Vase mode!  In sport mode you can print the container and lid in about 30min using only 9.5g of material.  Fits perfectly in the AMS with both the stock tray and the Hydra upgrade tray.

Print the two parts as provided.  I recommend 3-4 bottom layers and 0.6mm line width.  The lid fits quite snugly but is still removable without much effort with these settings.  If you go over 0.6, you'll probably need to scale up the lid by a few percent (3% at 0.9 is reported to work well) in order for the lid to fit.  I also suggest using a transparent filament (I printed mine in PETG) so you can easily see when your desiccant needs recharging.