Makita 18V vacuum with integrated cyclone

I like the Makita handheld vacuums, but the filters clog quickly. The cyclone attachment resolves this, but makes it a bit unwieldy. This design adapts the cyclone attachment (https://www.makitatools.com/products/details/191D70-5) directly to the vacuum so it's all integrated into one system. 

It's designed for the FCL281, but will probably fit most 18V Makitas. It can be mounted above or below, whichever you prefer.

• Makita Cyclone Bin and Makita Cyclone Bin Latch are a smaller cyclone bin so you can use shorter vacuum nozzles.
• Makita Cyclone is the main component. Just replace the top part of the Makita cyclone adaptor with this part. 

No supports required. Print it with the Bin base downwards, the latches on their sides, and the adaptor with the vacuum side downwards. It uses 2x30mm m3 nuts and bolts and a pair of 6.5x10mm springs to hold the latches.