Modular, Flat Top, Pill Organizer, or Small Parts Drawers

These are interlocking drawers that have a flat top so that you can easily place items on top of the drawer assembly.

The drawers feature curved on all four inside bottom edges to facilitate ease of removing small pills/parts, and an ergonomic, stylized handle on the front.

Print instructions

The Drawer should be printed with the open side on top (The way you would use it). I have had success without supports, but depending on your shell thickness you may want to add a little around the base.

Layer height: 0.2
Nozzle: 0.4
Supports: touching build plate only (60-65 degrees)
Infill: 15%
Platform: Skirt (or raft if you have problems with adhesion)
Material: PLA & PETG worked great (pre sliced gcode is PLA)

The Container should be printed with the open side up as well (rotated up 90degrees from how you would use it).

Layer height: 0.3
Nozzle: 0.4
Supports: none
Infill: 10%
Platform: Skirt
Material: PLA & PETG worked great (pre sliced gcode is PLA)

Update 2/8/21:
Added .stl file types
Updated drawer file (improved printabaility)